Repair Hyundai Getz

Hyundai Getz. The maintenance
+ 1. Operation and maintenance service
+ 2. The engine
+ 3. Transmission
+ 4. A running gear
+ 5. A steering
+ 6. Brake system
+ 7. An electric equipment
- 8. A body
   Features of a design
   Care of the car
   Repair of a body of the car
   Removal and installation of external elements of a body of the car
   Removal and installation of elements of the equipment of salon and furnish of a body of the car
   Osteklenie bodies
   Possible malfunctions of a body, their reason and ways of elimination
9. Electric equipment schemes


864beb60





Hyundai Getz>> Body>> Removal and installation of elements of the equipment of salon and furnish of a body of the car
The central console of the panel of devices  

Fig. 8.62. The central console of the panel of devices: 1 – a cover of the lever of a gear change; 2 – switches of heating of seats; 3 – прикуриватель; 4 – facings of the central console; 5 – contact sockets of elements of heating of seats; 6 – a cover; 7 – the central console


The central console of the panel of devices is shown on fig. 8.62.
Removal and installation

Fig. 8.63. Screws of fastening of the console


Turn away two screws of fastening of the console (fig. 8.63).
Establish the lever of a drive of lay brake system in extreme top position and remove the console, having lifted it for a back part.
Separate a contact socket прикуривателя.
Installation is spent in an order, the return to removal.

The panel of devices

Fig. 8.64. The panel of devices: 1 – a casing of a steering column; 2 – a steering column; 3 – a peak of a combination of devices; 4 – a combination of devices; 5 – a lateral nozzle of system of ventilation of a body; 6, 12 – face facing of the panel of devices; 7 – an arm; 8 – the panel of devices; 9 – the audiosystem block; 10 – a lateral nozzle of system of ventilation of a body; 11 – an arm; 13 – a ware box; 14 – an arm of fastening of the block of an audiosystem; 15 – the central console of the panel of devices; 16 – switches of the central console of the panel of devices; 17 – the bottom facing of the panel of devices


The panel of devices is shown on fig. 8.64.
The panel of devices is executed in the form of a uniform detail and represents a metal skeleton with a power absorbing layer from пенополиуретана which from lateral aspect is revetted by a decorative film.

       THE PREVENTION
At using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.

Removal and installation of a combination of devices
Establish a steering column in the bottom position.

Fig. 8.65. The screw of fastening of a peak of a combination of devices: 1 – the screw of fastening of a peak of a combination of devices; 2 – a peak of a combination of devices


Remove a peak of a combination of devices, having turned away the fastening screw (fig. 8.65).
Turn away screws of fastening of a combination of devices and take out it from a nest.

Fig. 8.66. Contact sockets of a combination of devices


Separate contact sockets of a combination of devices and remove a combination of devices (fig. 8.66).
Installation is spent in an order, the return to removal.

       PREVENTIONS
At using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the panel of devices.

Removal and installation of the bottom facing of the panel of devices
Establish a steering column in the top position.
Remove facing of a threshold of a door and the bottom facing of a forward rack.

Fig. 8.67. A cover of the block of safety locks of the panel of devices


Uncover the block of safety locks (fig. 8.67).

Fig. 8.68. Elements of fastening of the bottom facing of the panel of devices (are specified by arrows): 1 – a self-diagnostics socket


Turn away two bolts and two screws of fastening of the bottom facing, disconnect the case of a socket of self-diagnostics and a cable of a drive of the lock of a cowl and remove the bottom facing of the panel of devices (fig. 8.68).
Installation is spent in an order, the return to removal.

       PREVENTIONS
At using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the panel of devices.

Removal and installation of a ware box
Open a ware box.

Fig. 8.69. Holders of a ware box (are shown by arrows)


Remove holders of a ware box (fig. 8.69).
Take out a ware box, having turned away screws of fastening of loops of a box.
Installation of a ware box is spent in an order, the return to removal.

Removal and installation of the bottom facing of the central console of the panel of devices
Remove the bottom facing of the central console of the panel of devices, having turned away the fastening screw from outside the driver.
Installation of the bottom facing of the central console of the panel of devices is spent in an order, the return to removal.

       THE PREVENTION
At using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the panel of devices.

Cнятие and installation of facing of the central console of the panel of devices
Remove a ware box.
Remove the bottom facing of the central console of the panel of devices.
Disconnect drive cables заслонок systems of ventilation and heating of salon from corresponding levers of a drive заслонок.

Fig. 8.70. Tips of cables of a drive заслонок systems of ventilation and salon heating


By means of a stripper remove the central console, since its bottom part (fig. 8.70).
Separate contact sockets of switches of the central console of the panel of devices and remove facing of the central console.
Installation of facing of the central console of the panel of devices is spent in an order, the return to removal.

       THE PREVENTION
At using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the panel of devices

Removal and installation of the block of an audiosystem
Remove a ware box.
Remove the bottom facing of the panel of devices.
Remove facing of the central console of the panel of devices.

Fig. 8.71. Screws of fastening of the block of an audiosystem


Turn away screws of fastening of the block of an audiosystem (fig. 8.71).
Separate contact sockets of the block of an audiosystem and remove it.
Installation of the block of an audiosystem is spent in an order, the return to removal.

       THE PREVENTION
At using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the panel of devices.

Removal and installation of a beam of the panel of devices
Remove a steering wheel with the module of a pillow of safety.
Remove the bottom facing of the panel of devices.
Remove a ware box.
Remove the bottom facing of the central console of the panel of devices.
Remove facing of the central console of the panel of devices.
Remove an audiosystem.
Remove face facings of the panel of devices.

Fig. 8.72. A contact socket of the aerial of an audiosystem: 1 – a windscreen; 2 – a contact socket of the aerial of an audiosystem; 3 – the panel of devices


Separate a radio antenna socket (fig. 8.72).
Remove the panel of devices, having turned away nine bolts of its fastening: four bolts of fastening are located (on two) under face facings of the panel.
Installation of the panel of devices is spent in an order, the return to removal.

Details of furnish of salon

Fig. 8.73. Facings of salon of cars with a five-door body: 1 – facing of a forward rack of a body; 2 – facing of a threshold of a forward door; 3 – the top facing of an average rack of a body;
4 – facing of a threshold of a back door; 5 – facing of a back rack of a body; 6 – back facing of a luggage space; 7 – a luggage space shelf; 8 – lateral facing of a luggage space; 9 – the bottom facing of an average rack of a body; 10 – the bottom facing of a forward rack of a body


Fig. 8.74. Facings of salon of cars with a three-door body: 1 – facing of a forward rack of a body; 2 – facing of a threshold of a door; 3 – the top facing боковины; 4 – facing боковины; 5 – lateral facing of a luggage space; 6 – a luggage space shelf; 7 – back facing of a luggage space; 8 – a luggage space rug; 9 – back facing of a threshold; 10 – the bottom facing of a forward rack of a body


Facings of salon of cars with a five-door body are shown on fig. 8.73, cars with a three-door body — on fig. 8.74.

       THE NOTE
Before removal of facings remove external уплотнители.

Facing of a forward rack of a body
Remove facing of a forward rack by means of a stripper of facings.

Facing of a threshold of a forward door
Cars with a five-door body
Remove facing of a threshold of a forward door, having disconnected three clips of fastening.
Installation is spent in an order, the return to removal.
Cars with a three-door body

Fig. 8.75. A clip of fastening of facing of a threshold of a forward door


Remove facing of a threshold of a forward door, having disconnected five clips of fastening (fig. 8.75).
Installation is spent in an order, the return to removal.

The bottom facing of a forward rack
Remove facing of a threshold of a forward door.
Remove the bottom facing of a forward rack, having disconnected a clip of its fastening.
Installation is spent in an order, the return to removal.

Facing of a threshold of a back door
Cars with a five-door body

Fig. 8.76. Fastenings of facing of a threshold of a back door


Remove facing of a threshold of a back door, having turned away screws of fastening and having disconnected the holder (fig. 8.76).
Installation is spent in an order, the return to removal.
Cars with a three-door body

Fig. 8.77. Fastenings of facing of a threshold of a back door


Remove back facing of a threshold, having turned away fastening screws (fig. 8.77).
Installation is spent in an order, the return to removal.

The bottom facing of an average rack of a body
Remove facing of a threshold of a forward door.
Remove facing of a threshold of a back door.

Fig. 8.78. A bolt of the bottom fastening of a seat belt of a forward seat


Fig. 8.79. Removal of the bottom facing of an average rack of a body


Turn away a bolt of the bottom fastening of a seat belt (fig. 8.78) a forward seat, disconnect a clip and remove the bottom facing of an average rack (fig. 8.79).
The moment of an inhaling of a bolt of the bottom fastening of a seat belt of a forward seat 40–50 Н·м.
Installation is spent in an order, the return to removal.

The top facing of an average rack of a body
Remove facing of a threshold of a forward door.
Remove facing of a threshold of a back door.
Remove the bottom facing of an average rack.
Remove facing of the top fastening of a seat belt of a forward seat, turn away a bolt of fastening and remove the top facing of an average rack.
The moment of an inhaling of a bolt of fastening of a seat belt of a forward seat 40–50 Н·м.
Installation is spent in an order, the return to removal.

Facing боковины (cars with a three-door body)
Remove forward facing of a threshold.
Remove back facing of a threshold.
Remove facing of a bolt of fastening directing a seat belt.
Turn away a bolt of the bottom fastening of a seat belt and the screw, remove facing боковины.

 Luggage space shelf  
Disconnect keeping cords of a shelf and remove a shelf, having pulled it upwards.
Shelf installation is spent in an order, the return to removal.

Back facing of a luggage space
Remove a luggage space shelf.
Remove a rug of a floor of a luggage space.
Remove back facing of a luggage space, having turned away fastening screws.
Installation is spent in an order, the return to removal.

Lateral facing of a luggage space
Remove facing of a threshold of a back door.
Cast away forward a back seat.
Remove a luggage space rug.
Remove back facing of a luggage space.
Remove a lamp of illumination of a luggage space.

Fig. 8.80. Elements of fastening of lateral facing of a luggage space of cars with a five-door body


Fig. 8.81. Elements of fastening of lateral facing of a luggage space of cars with a three-door body


Turn away bolts of fastening of a floor of a luggage space, ослабьте an inhaling of a bolt of the bottom fastening of a seat belt of a back seat and by means of a stripper remove lateral facing of a luggage space (fig. 8.80 and 8.81).
Installation is spent in an order, the return to removal.

Facing of a back rack of a body
Cars with a five-door body

Fig. 8.82. A bolt of the bottom fastening of a seat belt of a back seat (it is specified by an arrow)


Turn away a bolt of the bottom fastening of a seat belt of a back seat (fig. 8.82).
Turn away a bolt of fastening of a seat belt of an average place of a back seat.

Fig. 8.83. Removal of facing of a back rack of a body


By means of a stripper remove facing of a back rack of a body (fig. 8.83).
Installation is spent in an order, the return to removal.
Cars with a three-door body
Remove back facing of a threshold.
Remove facing боковины.
Remove back facing of a luggage space.
Remove lateral facing of a luggage space.
Turn away two screws, turn away a bolt of fastening of a seat belt of an average place of a back seat and remove facing of a back rack of a body.

Sun-protection peaks
Turn away screws of fastening of a sun-protection peak, remove a peak and the holder.
Installation is spent in an order, the return to removal.

Hand-rail
Take aside facing of the screw of fastening of a hand-rail, having hooked its screw-driver.

Fig. 8.84. Screws of fastening of a hand-rail (are shown by arrows)


Remove a hand-rail, having turned away fastening screws (fig. 8.84).
Installation is spent in an order, the return to removal.

The ceiling console

Fig. 8.85. Removal рассеивателя a plafond of illumination of salon


Remove рассеиватель a plafond of illumination of salon, accurately having hooked its screw-driver with flat шлицем (fig. 8.85).

Fig. 8.86. Bolts of fastening of the console of a roof


Turn away two bolts of fastening of the console (fig. 8.86), separate a contact socket and remove the roof console.
Installation is spent in an order, the return to removal.

Roof upholstery
For removal of an upholstery of a roof remove following details:
– Forward seats;
– A back seat;
– The roof console;
– Facings of forward racks of a body;
– Facings of thresholds of forward doors;
– Facings of thresholds of back doors;
– Seat belts of forward seats;
– The bottom and top facings of average racks of a body;
– The bottom fastenings of seat belts of a back seat;
– Back facing of a luggage space;
– Fastening of a seat belt of an average place of a back seat;
– Lateral facings of a luggage space;
– Facings of back racks of a body;
– Sun-protection peaks and hand-rail.
Remove a roof upholstery, having disconnected holders.
Installation is spent in an order, the return to removal.

Seats
Forward seats

Fig. 8.87. A forward seat: 1 – a headrest; 2 – a seat back; 3 – the handle of adjustment of an angle of slope of a back of a seat; 4 – handles of adjustment of longitudinal position of a seat; 5 – a seat sled; 6 – a seat pillow


The forward seat is shown on fig. 8.87.
Removal and installation
Turn away four bolts of fastening of a forward seat.
The moment of an inhaling of bolts of fastening of a forward seat 35–55 Н·м.
Separate a contact socket of a control lamp of not fastened seat belt and remove a forward seat.
Installation of forward seats is spent in an order, the return to removal.

Back seat
Removal and installation

Fig. 8.88. Bolts of fastening of a back seat


Turn away four bolts of fastening of a back seat (fig. 8.88).
The moment of an inhaling of bolts of fastening of a back seat 35–55 Н·м.
Combine a back seat and take out it from the car through a doorway.

Seat belts
Safety measures at the reference with seat belts
With mechanical преднатяжителем
After operation преднатяжителя a belt the belt reuse is not supposed, replace a belt new.
At removal of a belt do not pull for straps is can cause casual operation преднатяжителя, damage of details and a trauma of hands.
Dismantling and repair преднатяжителя are not supposed.
At installation of a belt after ввертывания (without an inhaling) a fastening bolt it is necessary to wind not less than 500 mm of a belt on the coil (after installation it can be extended from the coil).
After installation of a belt and вытягивания from the coil more than 2000 mm of a belt (from the centre of a plate of the bottom fastening to the coil centre) small jerk can cause operation преднатяжителя.
The installation height преднатяжителя should not exceed 40 see
Do not take in hands more than one преднатяжителя.

Safety measures at the reference with seat belts with pyrotechnic преднатяжителем
After operation преднатяжителя a belt the belt reuse is not supposed, replace a belt new.
At removal of a belt do not pull for straps is can cause casual operation преднатяжителя, damage of details and a trauma of hands.
Dismantling and repair преднатяжителя are forbidden.
Connect the storage battery only upon termination of installation преднатяжителя.
At removal преднатяжителя execute the following:
– Be convinced that power supplies are disconnected also ignition switched off;
– Disconnect a wire from the negative plug of the storage battery;
– Wait not less than one minute;
– Separate a contact socket газогенератора, turn away a bolt of fastening and remove преднатяжитель.
Installation is spent in an order, the return to removal.

       THE PREVENTION
Wrap up a fabric a screw-driver used at work or a stripper not to damage a detail.

Removal and installation of seat belts of forward seats
Before belt removal remove following details:
– Facing of a threshold of a forward door;
– Facing of a threshold of a back door;
– The bottom facing of an average rack of a body;
– The top facing of an average rack of a body.
Remove a seat belt of a forward seat.
Installation is spent in an order, the return to removal.

Removal and installation of seat belts of lateral places of a back seat
Before belt removal remove following details:
– Back facing of a luggage space;
– Lateral facing of a luggage space;
– Facing of a back rack of a body.
Remove a belt of a lateral place of a back seat.
Installation is spent in an order, the return to removal.
Removal and installation of a seat belt of an average place of a back seat
Before belt removal remove following details:
– Back facing of a luggage space;
– Lateral facing of a luggage space;
– Facing of a back rack of a body.
Remove a belt of an average place of a back seat.
Installation is spent in an order, the return to removal.
????????? ?????? ??????? ?????