|
Fig. 7.80. An arrangement of elements of radio equipment: 1 – an antenna cable; 2, 6 – dynamics in forward doors; 3, 5 – dynamics in back doors; 4 – the aerial on a roof; 7 – the audiosystem block
|
The arrangement of elements of radio equipment is shown on fig. 7.80.
The audiosystem block
Removal and installation
Disconnect a wire from the negative plug of the storage battery.
Turn away two screws and two bolts of fastening of the bottom facing of the panel of devices from outside the driver.
Disconnect from the bottom facing of the panel of devices a cable of a drive of the lock of a cowl and separate a socket of a line of data transmission.
Remove a ware box.
Disconnect drive cables заслонок adjustments of temperature and distribution of air streams.
Disconnect clips, separate sockets and a screw-driver cautiously take the central panel of the panel of devices.
|
Fig. 7.81. Removal of the block of an audiosystem
|
Turn away four screws of fastening of the block of an audiosystem (fig. 7.81), separate sockets of wires and remove the audiosystem block.
Installation is spent in an order, the return to removal.
Dynamics
Removal and installation
Dynamics lobbies
Turn away screws of fastening of the internal handle of a door, disconnect from the handle draught of a drive of the lock and draught of deenergizing of the lock, remove the internal handle of a door.
Turn away screws of fastening of an upholstery of a forward door and cautiously a screw-driver remove an upholstery.
THE PREVENTION
Used for removal of an upholstery a screw-driver wrap up a fabric not to damage a paint and varnish covering of a body.
|
|
Fig. 7.82. Screws of fastening forward dynamics
|
Remove forward динамик, having turned away four screws of fastening (fig. 7.82) and having separated a contact socket.
Installation is spent in an order, the return to removal.
Back dynamics
Turn away screws of fastening of the internal handle of a door, disconnect from the handle draught of a drive of the lock and draught of deenergizing of the lock, remove the internal handle of a door.
Turn away screws of fastening of an upholstery of a forward door and a screw-driver cautiously remove an upholstery.
THE PREVENTION
Used for removal of an upholstery a screw-driver wrap up a fabric not to damage a paint and varnish covering of a body.
|
|
Fig. 7.83. Screws of fastening back dynamics
|
Remove back динамик, having turned away four screws of its fastening (fig. 7.83) and having separated a contact socket.
Installation is spent in an order, the return to removal.
Check of a technical condition dynamics
Check up динамик by means of an ohmmeter.
|
Fig. 7.84. The scheme of connection of an ohmmeter at check dynamics
|
Динамик it is serviceable, if the ohmmeter attached to conclusions («+») and («–») (fig. 7.84) its same channel, shows demanded value of full resistance (4 Ohm).
One more sign of serviceability dynamics is click which is listened at ohmmeter connection to conclusions dynamics.
The aerial
Removal and installation
|
Fig. 7.85. Installation штыревой aerials in the roof panel: 1 – штыревая the aerial; 2 – the roof panel; 3 – a nut; 4 – a roof upholstery
|
Installation штыревой aerials in the roof panel is shown on fig. 7.85.
Screw-driver with flat шлицем remove рассеиватель a plafond of the console of a roof.
Remove the roof console, having turned away two screws of fastening and having separated a contact socket of a plafond of a roof.
Remove the aerial, having turned away a fastening nut.
Remove a sun-protection peak and a hand-rail, delay downwards an upholstery of a ceiling and remove an antenna cable.
Installation is spent in an order, the return to removal.